Engineering and Design

Sura Al-Qudah
- Engineering and Design - Associate Professor
Person: Faculty
Nicole Larson
- Engineering and Design - Professor, Plastics and Composites Engineering
Person: Faculty
Jason Morris
- Engineering and Design - Professor, Industrial Design
Person: Faculty

19 Conference contribution
9 Presentation
5 Article
3 Digital or Visual Products
More
- 2 Other contribution
- 1 Paper

IMPACT OF CORE SURFACE FINISH ON ADHESION TO FACE SHEETS
Mohtadi, K., Standiford, M. & Larson, N., 2022, SAMPE 2022 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference; vol. 2022-May).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Development of unidirectional carbon prepreg using a solvent dip process
Standiford, M., Grubb, C. & Larson, N., 2021, SAMPE 2021. Soc. for the Advancement of Material and Process Engineering, p. 708-723 16 p. (International SAMPE Technical Conference; vol. 2021-June).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Developing a procedure for prepreg tack characterization
Smith, E. J., Grubb, C., Misasi, J. & Larson, N., 2019.
Research output: Contribution to conference › Paper › peer-review
Developing a Procedure for Prepreg Tack Characterization
Larson, N., Smith, E., Grubb, C. & Misasi, J., Sep 2019.
Research output: Contribution to conference › Presentation
Teaching Composites Manufacturing Through Tooling
Larson, N. & Frye, D., Jun 2019.
Research output: Contribution to conference › Presentation
Transitioning to Engineering Without Losing Experiential Learning
Newcomer, J. L., Larson, N., Morton, T. & Yip-Hoi, D., Jun 2019.
Research output: Contribution to conference › Presentation
Manufacturing and Characterization of Basalt Fiber-Phenolic Resin Composites
Lindskog, G., Grubb, C., Peebles, D. & Larson, N., May 2017.
Research output: Contribution to conference › Presentation
Development of Safety Protocol, Features, and Fail-Safes for a Laboratory-Scale Manufacturing
Grubb, C. & Larson, N., Jun 2016.
Research output: Contribution to conference › Presentation
Relief of Cure Stress in Prepreg Composites with Engineered Voids: A Solution to Warping in Composite Phenolic Resin/Fiberglass Laminates
Hackler, R. A., Hollcraft, A. T., Kirkness, T. A., Larson, N., Hoekstra, N. L. & Ridere, D. A., Mar 6 2016, In: Industrial & Engineering Chemistry Research. 55, 12
Research output: Contribution to journal › Article › peer-review
Core surface treatmentsto investigateadhesion of thermoplastic coatings for aerospace fasteners
Deans, E., Ohlfs, A., Rider, D., Larson, N., Hoekstra, N., Bussard, K., Tandjung, D., Sattayatam, P. & DelPinto, J., 2015, ANTEC 2015 - Proceedings of the Annual Technical Conference and Exhibition of the Society of Plastics Engineers. Society of Plastics Engineers, p. 1890-1895 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Out of autoclave surface finish investigation
Lockwood, A. & Larson, N., 2015, SAMPE Baltimore 2015 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference; vol. 2015-January).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Investigation of the stability of phenolic prepreg manufacturing using thermal analysis techniques
Karich, K. E., Fogel, A., Hollcraft, A. T., Mumford, T. K., Fredrick, C. K., Katz, N. M., Hoekstra, N. L., Rider, D. A. & Larson, N. S., 2014, SAMPE Seattle 2014 International Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
TEAGUE: Design & Beauty, a historical biographical documentary film about the great American designer, Walter D. Teague.
Morris, J., 2014
Research output: Other contribution
Teague: Design and Beauty
Morris, J., 2014
Research output: Non-textual form › Digital or Visual Products
The effects of processing parameters on warp in composite sandwich structures
Karich, K. E., Fogel, A., Hjorten, C. E., Katz, N. M., Hoekstra, N. L., Rider, D. A. & Larson, N. S., 2014, SAMPE Seattle 2014 International Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Analysis of surface roughness for slot milling of twintex
Boser, R. M. & Larson, N., 2013, SAMPE 2013 Conference and Exhibition: Education and Green Sky - Materials Technology for a Better World. p. 2721-2732 12 p. (International SAMPE Technical Conference).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Drilling of composites
Wilfer, L. & Larson, N., 2013, 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013. Society of Plastics Engineers, p. 27-31 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 1).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Development of Thermoplastic Panels for Haiti
Larson, N. & Misasi, J., 2012, In: International Journal of Science in Society. 3, 1
Research output: Contribution to journal › Article › peer-review
Enhancing Design Education with Video: Experimenting with the Flipped Classroom Structure for Industrial Designo Title
Morris, J., Aug 2012.
Research output: Contribution to conference › Presentation
Hoima Bicycle cargo bicycle and Valkyrie faired recumbent bicycle
Morris, J., 2011.
Research output: Contribution to conference › Presentation
Investigating the surface energy of silicone
Pyke, K. & Larson, N., 2011, 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. p. 2361-2365 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 3).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
The Consummate Professional: Walter Dorwin Teague
Morris, J., Sep 2011.
Research output: Contribution to conference › Presentation
Design with the Majority: The Collaborative Design of a Cargo Bicycle for Uganda
Morris, J. A., Mar 2010.
Research output: Contribution to conference › Presentation
Hoima Bicycle
Morris, J., 2010
Research output: Non-textual form › Digital or Visual Products
Hoima Bicycle, documentary
Morris, J., 2010
Research output: Other contribution
Low cost, low production composite tooling
Kotlik, M., Panerio, R. & Larson, N., 2010, SAMPE 2010 Conference and Exhibition "New Materials and Processes for a New Economy". (International SAMPE Symposium and Exhibition (Proceedings)).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Design challenges presented by a composite hydrofoil
Petersen, W. R. & Larson, N. S., 2009, SAMPE '09 Spring Symposium Conference Proceedings: Changing Times. New Opportunities. Are You Prepared?. (International SAMPE Symposium and Exhibition (Proceedings); vol. 54).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Designing for diverse loading conditions and predictable failure in a composite hydrofoil
Petersen, W. & Larson, N., 2009, 67th Annual Technical Conference of the Society of Plastics Engineers 2009, ANTEC 2009. p. 2419-2423 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 4).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Design of a composite hydrofoil for impact loading
Petersen, W. R. & Larson, N. S., 2009, SAMPE '09 Spring Symposium Conference Proceedings: Changing Times. New Opportunities. Are You Prepared?. (International SAMPE Symposium and Exhibition (Proceedings); vol. 54).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Form Function
Morris, J., 2009
Research output: Non-textual form › Digital or Visual Products

A local board game made of mushrooms? Sure, sounds fungi; A Stanwood trio plans to launch their first board game, using fungi and recycled materials to teach about Borneo rainforests.
Larson, N.
7/31/22
1 item of Media coverage
Press/Media: Research
A local board game made of mushrooms? Sure, sounds fungi
Larson, N.
7/31/22
1 item of Media coverage
Press/Media: Research
IDC 2021: Event Recap
Morris, J.
10/3/21
1 item of Media coverage
Press/Media: Research
Pair of Western Washington University Seniors Win the 2020 GRAY Design Awards for 'Lo'
Morris, J.
12/8/20
1 item of Media coverage
Press/Media: Research

Engineering and Design

Profiles

Research output

Press/Media